M3C4

Corrosion induced crack patterns are influenced by many things. Rebar diameter, spacing, cover depth, and boundary conditions all play a role. In the videos, two different scenarios are compared: both specimens have 2 rebars of 10mm diameter, but one has a cover depth of 10 mm, while the other one has a cover depth of 20 mm. Crack growth in both specimens is shown. The difference is obvious.

However, in reality, corrosion rarely causes uniform expansion of the reinforcing steel. Therefore, it is possible that real pressure on the surrounding concrete acts in a different way (Ohtsu and Uddin, "Mechanisms of corrosion-induced cracks in concrete at meso- and macro-scales", Journal of Advanced Concrete Technology Vol.6 , No. 3, 419-429, October 2008):

The effect of different scenarios on the crack patterns in our model is visible in the following snapshots (at 5000 steps- yellow for visibility):

(top to bottom- radial, horizontal and vertical loading scheme, respectively)

It is clear that the loading condition makes a difference in the cracking behavior of the cover. Hope everyone is convinced! Enjoy the holidays!